To ensure compliance with standard AML regulations, we require you to submit the following documentation: Proof of Identification: A clear copy of the front and back of your government- issued photo ID, i.e. A valid passport, driver’s licence, or national ID card. The machinery which carries out this process of removing segments of RNA is known as RNA splicing. Our understanding of how mutations in the epigenetic and RNA splicing machinery contribute to AML remains a mystery. New Research Demonstrating Cooperation of Oncogenic Drivers.

• Aml Driver Test
• Aml Driver License
• Aml Ldx10 Driver

Assessing Compliance with BSA Regulatory Requirements

Customer Identification Program—Overview

Objective. Assess the bank’s compliance with the statutory and regulatory requirements for the Customer Identification Program (CIP).

All banks must have a written CIP. ⁴⁰ The CIP rule implements section 326 of the USA PATRIOT Act and requires each bank to implement a written CIP that is appropriate for its size and type of business and that includes certain minimum requirements. The CIP must be incorporated into the bank’s BSA/AML compliance program, which is subject to approval by the bank’s board of directors. ⁴¹ The implementation of a CIP by subsidiaries of banks is appropriate as a matter of safety and soundness and protection from reputational risks. Domestic subsidiaries (other than functionally regulated subsidiaries subject to separate CIP rules) of banks should comply with the CIP rule that applies to the parent bank when opening an account within the meaning of 31 CFR 1020.100. ⁴²

The CIP is intended to enable the bank to form a reasonable belief that it knows the true identity of each customer. The CIP must include account opening procedures that specify the identifying information that will be obtained from each customer. It must also include reasonable and practical risk-based procedures for verifying the identity of each customer. Banks should conduct a risk assessment of their customer base and product offerings, and in determining the risks, consider:

• The types of accounts offered by the bank.
• The bank’s methods of opening accounts.
• The types of identifying information available.
• The bank’s size, location, and customer base, including types of products and services used by customers in different geographic locations.

Pursuant to the CIP rule, an 'account' is a formal banking relationship to provide or engage in services, dealings, or other financial transactions, and includes a deposit account, a transaction or asset account, a credit account, or another extension of credit. An account also includes a relationship established to provide a safe deposit box or other safekeeping services or to provide cash management, custodian, or trust services.

An account does not include:

• Products or services for which a formal banking relationship is not established with a person, such as check cashing, funds transfer, or the sale of a check or money order.
• Any account that the bank acquires. This may include single or multiple accounts as a result of a purchase of assets, acquisition, merger, or assumption of liabilities.
• Accounts opened to participate in an employee benefit plan established under the Employee Retirement Income Security Act of 1974.

The CIP rule applies to a 'customer.' A customer is a 'person' (an individual, a corporation, partnership, a trust, an estate, or any other entity recognized as a legal person) who opens a new account, an individual who opens a new account for another individual who lacks legal capacity, and an individual who opens a new account for an entity that is not a legal person (e.g., a civic club). A customer does not include a person who does not receive banking services, such as a person whose loan application is denied. ⁴³ The definition of 'customer' also does not include an existing customer as long as the bank has a reasonable belief that it knows the customer’s true identity. ⁴⁴ Excluded from the definition of customer are federally regulated banks, banks regulated by a state bank regulator, governmental entities, and publicly traded companies (as described in 31 CFR 1020.315(b)(1) through (4)).

Customer Information Required

The CIP must contain account-opening procedures detailing the identifying information that must be obtained from each customer. ⁴⁵ At a minimum, the bank must obtain the following identifying information from each customer before opening the account: ⁴⁶

• Name.
• Date of birth for individuals.
• Address. ⁴⁷
• Identification number. ⁴⁸

Based on its risk assessment, a bank may require identifying information in addition to the items above for certain customers or product lines.

Customer Verification

The CIP must contain risk-based procedures for verifying the identity of the customer within a reasonable period of time after the account is opened. The verification procedures must use 'the information obtained in accordance with [31 CFR 1020.220] paragraph (a)(2)(i),' namely the identifying information obtained by the bank. A bank need not establish the accuracy of every element of identifying information obtained, but it must verify enough information to form a reasonable belief that it knows the true identity of the customer. The bank’s procedures must describe when it will use documents, nondocumentary methods, or a combination of both.

Verification Through Documents

A bank using documentary methods to verify a customer’s identity must have procedures that set forth the minimum acceptable documentation. The CIP rule gives examples of types of documents that have long been considered primary sources of identification. The rule reflects the federal banking agencies’ expectations that banks will review an unexpired government-issued form of identification from most customers. This identification must provide evidence of a customer’s nationality or residence and bear a photograph or similar safeguard; examples include a driver’s license or passport. However, other forms of identification may be used if they enable the bank to form a reasonable belief that it knows the true identity of the customer. Nonetheless, given the availability of counterfeit and fraudulently obtained documents, a bank is encouraged to review more than a single document to ensure that it has a reasonable belief that it knows the customer’s true identity.

For a 'person' other than an individual (such as a corporation, partnership, or trust), the bank should obtain documents showing the legal existence of the entity, such as certified articles of incorporation, an unexpired government-issued business license, a partnership agreement, or a trust instrument.

Verification Through Nondocumentary Methods

Banks are not required to use nondocumentary methods to verify a customer’s identity. However, a bank using nondocumentary methods to verify a customer’s identity must have procedures that set forth the methods the bank will use. Nondocumentary methods may include contacting a customer; independently verifying the customer’s identity through the comparison of information provided by the customer with information obtained from a consumer reporting agency, public database, or other source; checking references with other financial institutions; and obtaining a financial statement.

The bank’s nondocumentary procedures must also address the following situations: An individual is unable to present an unexpired government-issued identification document that bears a photograph or similar safeguard; the bank is not familiar with the documents presented; the account is opened without obtaining documents (e.g., the bank obtains the required information from the customer with the intent to verify it); the customer opens the account without appearing in person; or the bank is otherwise presented with circumstances that increase the risk that it will be unable to verify the true identity of a customer through documents.

Additional Verification for Certain Customers

The CIP must address situations where, based on its risk assessment of a new account opened by a customer that is not an individual, the bank will obtain information about individuals with authority or control over such accounts, including signatories, in order to verify the customer’s identity. This verification method applies only when the bank cannot verify the customer’s true identity using documentary or nondocumentary methods. For example, a bank may need to obtain information about and verify the identity of a sole proprietor or the principals in a partnership when the bank cannot otherwise satisfactorily identify the sole proprietorship or the partnership.

Lack of Verification

The CIP must also have procedures for circumstances in which the bank cannot form a reasonable belief that it knows the true identity of the customer. These procedures should describe:

Aml Driver Test

• Circumstances in which the bank should not open an account.
• The terms under which a customer may use an account while the bank attempts to verify the customer’s identity.
• When the bank should close an account, after attempts to verify a customer’s identity have failed.
• When the bank should file a SAR in accordance with applicable law and regulation.

Recordkeeping and Retention Requirements

A bank’s CIP must include recordkeeping procedures. At a minimum, the bank must retain the identifying information (name, address, date of birth for an individual, TIN, and any other information required by the CIP) obtained at account opening for a period of five years after the account is closed. ⁴⁹ For credit cards, the retention period is five years after the account closes or becomes dormant. The bank must also keep a description of the following for five years after the record was made:

• Any document that was relied on to verify identity, noting the type of document, the identification number, the place of issuance, and, if any, the date of issuance and expiration date.
• The method and the results of any measures undertaken to verify identity.
• The results of any substantive discrepancy discovered when verifying identity.

Comparison With Government Lists

The CIP must include procedures for determining whether the customer appears on any federal government list of known or suspected terrorists or terrorist organizations. Banks are contacted by the U.S. Treasury in consultation with their federal banking agency when a list is issued. At such time, banks must compare customer names against the list within a reasonable time of account opening or earlier, if required by the government, and they must follow any directives that accompany the list.

As of the publication date of this manual, there are no designated government lists to verify specifically for CIP purposes. Customer comparisons to Office of Foreign Assets Control lists and 31 CFR 1010.520 (commonly referred to as section 314(a) requests) remain separate and distinct requirements.

Adequate Customer Notice

The CIP must include procedures for providing customers with adequate notice that the bank is requesting information to verify their identities. The notice must generally describe the bank’s identification requirements and be provided in a manner that is reasonably designed to allow a customer to view it or otherwise receive the notice before the account is opened. Examples include posting the notice in the lobby, on a Web site, or within loan application documents. Sample language is provided in the regulation:

IMPORTANT INFORMATION ABOUT PROCEDURES FOR OPENING A NEW ACCOUNT — To help the government fight the funding of terrorism and money laundering activities, federal law requires all financial institutions to obtain, verify, and record information that identifies each person who opens an account. What this means for you: When you open an account, we will ask for your name, address, date of birth, and other information that will allow us to identify you. We may also ask to see your driver’s license or other identifying documents.

Reliance on Another Financial Institution

A bank is permitted to rely on another financial institution (including an affiliate) to perform some or all of the elements of the CIP, if reliance is addressed in the CIP and the following criteria are met:

• The relied-upon financial institution is subject to a rule implementing the AML program requirements of 31 USC 5318(h) and is regulated by a federal functional regulator. ⁵⁰
• The customer has an account or is opening an account at the bank and at the other functionally regulated institution.
• Reliance is reasonable, under the circumstances.
• The other financial institution enters into a contract requiring it to certify annually to the bank that it has implemented its AML program, and that it will perform (or its agent will perform) the specified requirements of the bank’s CIP.

Use of Third Parties

Aml Driver License

The CIP rule does not alter a bank’s authority to use a third party, such as an agent or service provider, to perform services on its behalf. Therefore, a bank is permitted to arrange for a third party, such as a car dealer or mortgage broker, acting as its agent in connection with a loan, to verify the identity of its customer. The bank can also arrange for a third party to maintain its records. However, as with any other responsibility performed by a third party, the bank is ultimately responsible for that third party’s compliance with the requirements of the bank’s CIP. As a result, banks should establish adequate controls and review procedures for such relationships. This requirement contrasts with the reliance provision of the rule that permits the relied-upon party to take responsibility.

Other Legal Requirements

Nothing in the CIP rule relieves a bank of its obligations under any provision of the BSA or other AML laws, rules, and regulations, particularly with respect to provisions concerning information that must be obtained, verified, or maintained in connection with any account or transaction.

The U.S. Treasury and the federal banking agencies have provided banks with Frequently Asked Questions (FAQ), which may be revised periodically. The FAQs and other related documents (e.g., the CIP rule) are available on FinCEN’s and the federal banking agencies’ Web sites.

The AMLI Debugger supports two types of specialized commands: AMLI Debugger extensions and AMLI Debugger commands.

When you are performing AML debugging, you should carefully distinguish between two different kinds of prompts that will appear in the Debugger Command window:

• When you see the kd> prompt, you are controlling the kernel debugger. All the standard kernel debugger commands and extensions are available. In addition, the AMLI Debugger extensions are also available. These extensions have a syntax of !amlicommand. The AMLI Debugger commands are not available in this mode.

• When you see the AMLI(? for help)-> prompt, you are controlling the AMLI Debugger. (When you are using WinDbg, this prompt will appear in the top pane of the Debugger Command window, and an Input> prompt will appear in the bottom pane.) From this prompt, you can enter any AMLI Debugger command. You can also enter any AMLI Debugger extension; these extensions should not be prefixed with !amli. The standard kernel debugging commands are not available in this mode.

• When you see no prompt at all, the target computer is running.

Aml Ldx10 Driver

At the beginning of any debugging session, you should set your AMLI Debugger options with the !amli set extension. The verboseon, traceon, and errbrkon options are also very useful. You should consider activating the spewon option. See the extension reference page for details.

There are several ways for the AMLI Debugger to become active:

• If a breakpoint in AML code is encountered, ACPI will break into the AMLI Debugger.

• If a serious error or exception occurs within AML code (such as an int 3), ACPI will break into the AMLI Debugger.

• If the errbrkon option has been set, any AML error will cause ACPI to break into the AMLI Debugger.

• If you want to deliberately break into the AMLI Debugger, use the !amli debugger extension and then the g (Go) command. The next time any AML code is executed by the interpreter, the AMLI Debugger will take over.

When you are at the AMLI Debugger prompt, you can type q to return to the kernel debugger, or type g to resume normal execution.

The following extensions are especially useful for AML debugging:

• The !amli dns extension displays the ACPI namespace for a particular object, the namespace tree subordinate to that object, or even the entire namespace tree. This command is especially useful in determining what a particular namespace object is -- whether it is a method, a fieldunit, a device, or another type of object.

• The !amli find extension takes the name of any namespace object and returns its full path.

• The !amli u extension unassembles AML code.

• The !amli lc extension displays brief information about all active ACPI contexts.

• The !amli r extension displays detailed information about the current context of the interpreter. This is useful when the AMLI Debugger prompt appears after an error is detected.

• Breakpoints can be set and controlled within AML code. Use !amli bp to set a breakpoint, !amli bc to clear a breakpoint, !amli bd to disable a breakpoint, !amli be to re-enable a breakpoint, and !amli bl to list all breakpoints.

• The AMLI Debugger is able to run, step, and trace through AML code. Use the run, p, and t commands to perform these actions.

For a full list of extensions and commands, see Using AMLI Debugger Extensions and Using AMLI Debugger Commands.

See Also